Design and Structural Analysis of a SWATH type vessel using the Finite Element Method and its response to Slamming events
DOI:
https://doi.org/10.25043/19098642.205Keywords:
Ship, Boat, Mechanical Model, Finite Element Method, Structure, SWATHAbstract
The main objective of this study is to analyze the structural response of a boat during a slamming event using the Finite Element Method in a Small Water Area Twin Hull (SWATH) type boat. In the mentioned load condition, the acceptance criteria established by a classification society must be fulfilled, taking into account the areas where this event affects the structure such as the junction deck, the pontoons and other structural members established by the standard, all this generated by the high pressure loads in the ship's structure in a very short period of time being an element of study in this type of vessels, as long as they are within the range of high speed vessels. Among the main results of this study were the deformations and stresses in the structure obtained under the reference parameters of the classification society.
Downloads
References
H. EVANS, "Basic Design Concepts," A.S.N.E. Journal, pp. 671-678, 1959. https://doi.org/10.1111/j.1559-3584.1959.tb01836.x
H. MURCIA, Application of the Finite Element Method in the Structural Analysis of a Swath-type Patrol Boat, Cartagena de Indias: Escuela Naval de Cadetes "Almirante Padilla", 2017.
GERMANISCHER LLOYD, Analysis Techniques, Hamburg: GL, 2013.
P. Y. ARIANTO, A. ZUBAYDI, B. PISCESA Y TUSWAN., "Experimental and Numerical Bending Analysis of Steel/Resin-Talk Sandwich Material," IPTEK , pp. 123-128, 2019. https://doi.org/10.12962/j20882033.v30i3.5496
E. ALTUNSARAY, D. ÜNSALAN, G. NESER, K. T. GÜRSEL Y M. TANEr, "A parametric study for static deflections of symmetrically laminated rectangular thin plates," Scientific Bulletin "Mircea cel Batran" Naval Academy, 2019.
D. FUENTES , M. SALAS, G. TAMPIER Y C. TRONCOSO, Analysis and Design of Marine Structures - Guedes Soares & Shenoi, Londres , 2015.
W. WU, B. LIU Y C. GUEDES, "Ultimate strength analysis of a SWATH ship subjected to transverse loads," Marine Structures, vol. 57, pp. 105-120, 2018. https://doi.org/10.1016/j.marstruc.2017.10.006
DIMAR, "Climatology of the Main Ports of the Colombian Caribbean: San Andres and Providencia," Dirección General Marítima Colombia, Cartagena, 2010.
DNV GL, Rules for Classification High Speed and Light Craft, Part 1 General Regulations Chapter 2 Class Notations, Høvik: DNV GL , 2018.
GERMANISHER LLOYD, "Classification and Construction Rules for High Speed Craft," GL, Hamburg, 2012.
B. PHELPS, Determination of wave loads for Ship Structural Analysis, Melbourne: Australian Departament of Defence, 1997.
C. FELIPPA, Introduction to the Finite Element Method, Boulder: University of Colorado at Boulder., 2004.
ANSYS, "Manual," ANSYS, 2012.
T. KURKI, "Utilization of integrated design and mesh generation in ship design process," Rakenteiden Mekaniikka (Journal of Structural Mechanics) , pp. 129-139, 2010.
M. COSTACHE Y G. JAGITE, "Global Strenght Analysis in Head Waves, for an Offshore Support Vessel," Asian Journal of Applied Science and Engineering, pp. 73-88, 26 septiembre 2014. https://doi.org/10.15590/ajase/2014/v3i8/54486
L. LIAO, A Study of Inertia Relief Analysis, Denver, Colorado: ASME, 2011. https://doi.org/10.2514/6.2011-2002
DNV GL, Finite Element Analysis, Hamburg: DNV GL, 2015.
A. MOLAND, Maritime Engineering Reference Book, Burlington: Elsevier, 2008, p. 46.
J. BJORHUS, "Jonathan Turner, Airplane Engineer," !e Seattle Times, 18 Octubre 1995. https://doi.org/10.1016/S0262-1762(99)81083-9
R. W. CLOUGH, "Original Formulation of the Finite Element Method," Finite Elements in Analysis and Design, pp. 89-101, 1990. https://doi.org/10.1016/0168-874X(90)90001-U
J. H. ARGYRIS, Energy Theorems and Structural Analysis, New York: London Butterworths, 1955.
M. M. Y.V. SATISH KUMAR, "Finite element analysis of ship structures using a new stiffened plate element," Ocean Research, vol. 22, pp. 361-374, 2000. https://doi.org/10.1016/S0141-1187(00)00014-6
P. PIALA Y T. KALINA, "Finite Element Method in Ship's Industry," Electronical Technical Journal od Technology, Engineering and Logistic in Transport, pp. 182-186, Diciembre 2010.
D. SERVIS, G. VOUDOURIS, M. SAMUELIDES Y A. PAPANIKOLAOU, "Finite element modelling and strength analysis of hold No. 1 of bulk carriers," National Technical University Athens Magazine, 2004. https://doi.org/10.1016/j.marstruc.2004.01.002
A. B. TRICLAVILCA TENORIO, D. A. MESTANZA RODRIGUEZ AND F. F. RIVERA TIRADO, "Simulation of Numerical Systems through Finite Elements of a River Vessel," International Conference IDS 2013, July 17, 2013.
J. F. USECHE, El Método de los Elementos Finitos en Mecánica de Sólidos: Conceptos y Formulación Básica, Cartagena: Universidad Tecnologica de Bolivar, 2006.
S. KOS, D. BRCIC Y V. FRANCIC, "Comparative Analysis of Conventional And Swath Passenger Catamaran," Journal of Maritime Studies, 2009.
M. SALAS, "Analysis of Mechanical Structures with the Finite Element Method," Author, Valdivia, 2014.
D. SOURCES, Analysis and Structural Optimization of a multihull designed in Aluminum, Valdivia: Universidad Austral de Chile, 2014.
J. T. CELIGÜETA LIZARZA, Método de los Elementos Finitos para el Análisis Estructural, San Sebastián: University of Navarra, 2011.
J. E. HURTADO, Introduction to Structural Analysis by Finite Elements, Manizales: Universidad Nacional de Colombia, 2010.
R. COURANT, "Variational Methods For the Solution of Problems of Equilibrium and Vibrations," Bulletin of the American Mathematical Society, 1949.
Published
How to Cite
Issue
Section
License
The authors who publish in this Journal certify that:
- The work submitted for publication in The Ship Science and Technology journal, was written by the author, given that its content is the product of his/her direct intellectual contribution.
- All data and references to material already published are duly identified with their respective credits and are included in the bibliographic notes and quotations highlighted as such.
- All materials submitted for publication are completely free of copyrights; consequently, the author accepts responsibility for any lawsuit or claim related with Intellectual Property Rights thereof, Exonerating of responsibility to The Science and Technology for the Development of Naval, Maritime, and Riverine Industry Corporation, COTECMAR.
- In the event that the article is chosen for publication by The Ship Science and Technology journal, the author state that he/she totally transfers reproduction rights of such to The Science and Technology for the Development of Naval, Maritime, and Riverine Industry Corporation, COTECMAR.
- The authors retain the copyright and transfer to COTECMAR the right of publication and reproduction of the work which will be simultaneously subject to the Creative Commons Attribution License (CC -BY) , which allows the license to copy, distribute, display and represent the work and to make derivative works as long as it recognizes and cites the work in the manner specified by the author or licensor.
- For more information about the Creative Commons Attribution License (CC -BY) and his use and scope, please visit the following web page https://creativecommons.org/licenses/by-sa/4.0/legalcode
