Diseño de una hélice marina para embarcaciones de carrera a escala en concurso de velocidad y eficiencia energética
DOI:
https://doi.org/10.25043/19098642.213Palabras clave:
hélice, propulsión naval, eficiencia energética, diseño hidrodinámicoResumen
En esta investigación se aborda el proceso de diseño óptimo, evaluación y fabricación de hélices de alta eficiencia energética para barcos de competición a escala. Este proyecto utiliza como ejemplo las etapas de diseño hidrodinámico, ensayos numéricos y la manufactura de cuatro prototipos. Durante el diseño hidrodinámico, se comparan tres metodologías de diseño, a saber: Teoría de los elementos de palas, teoría de línea de sustentación y diseño basado en la serie de hélices DTMB. La función objetivo del diseño optimizado se basa en la obtención de la distribución radial de cuerda y paso que genere el mayor empuje, velocidad y eficiencia. Del mismo modo, se evalúa el rendimiento de cada prototipo mediante CFD en un canal virtual registrando empuje, momento y velocidad. Finalmente, se presenta el proceso de fabricación aditiva aplicado. Las hélices prototipadas presentan eficiencias y velocidades máximas aproximadamente un 15% superiores a las hélices comerciales recomendadas para este tipo de embarcaciones. Este estudio fue desarrollado por el grupo Hydrometra en el marco del concurso internacional Hydrocontest 2017.
Descargas
Referencias bibliográficas
A. MOLLAND and S. TURNOCK, Marine rudders and control surfaces. Oxford: Elsevier/ Butterworth-Heinemann, 2007.
B.P. EPPS and R.W. KIMBALL, OpenProp v3: Open-source software for the design and analysis of marine propellers and horizontalaxis turbines. URL: http://engineering.dartmouth.edu/epps/openprop, 2013
B.P. EPPS, "On the rotor lifting-line wake model", Journal of Ship Production and Design, vol. 32, 3:1-15, 2016.
B.P. EPPS, R.W. KIMBALL, "Unified Rotor Lifting-line Theory", Journal of Ship Research, vol. 57, 4:1-21, 2013.
C. JENG-HORNG, S. YU-SHAN, “Basic design of a series propeller with vibration consideration by genetic algorithm”, J. Mar. Sci. Technol. 12: 119-129, 2007.
CHUNG, "An enhanced propeller design program based on propeller vortex lattice lifting-line theory" Master Thesis, Massachusetts Institute of Technology, 2007.
D. CABEZÓN et al., "Comparison of turbulence models for the computational fluid dynamics simulation of wind turbine wake in the atmospheric boundary layer", Wind Energy., vol. 14, 7: 909-921, 2011.
D. MARTEN, J. WENDLER, “QBlade Guidelines v0.6”, QBlade, TU Berlin, 2013.
E. KNUTSEN SKÅLAND, "The Influence of the Choice of Propeller Design Tool on Propeller Performance", Master Thesis, Norwegian University of Science and Technology, 2016.
J. CARLTON, Marine propellers and propulsion, Third Edition., Butterworth- Heinemann Ltd, 2010.
J. KULCZYK, Ł. SKRABURSKI, M. ZAWIŚLAK, "Analysis of screw propeller 4119 using the Fluent system", Archives of Civil and Mechanical Engineering, vol. 7, 4:129-137, 2007.
J.M. MEJÍA et al., “Propuesta Metodológica para el Diseño de las Aspas de Turbinas de Viento de Eje Horizontal”, Energética, 33:37-45, 2005.
K. M. FLOOD, “Propeller performance Analysis Using Lifting-line Theory”, Master Thesis, Massachusetts Institute of Technology, 2008.
M.M.C. OOSTERVELD, P. VAN OOSSANEN, “Further Computer-Analysed Data of the Wageningen B-screw series”, International Shipbuilding Progress, vol. 22, 251:3-14, 1975.
O. GUR, A. ROSEM, “Comparison between blade-element models of propellers” The Aero. Journal, vol. 112 1138: 689-704, 2008.
S. BRIZZOLARA, D. VILLA y S. GAGGERO, "A systematic comparison between RANS and Panel Methods for Propeller Analysis", Proceedings of 8th International Conference on Hydrodynamics, 2008.
TREJO I. et al., “Analysis of a ship propeller using CFD codes”, MARINE 2017, Barcelona, Spain, 2017.
Descargas
Publicado
Cómo citar
Número
Sección
Licencia
The authors who publish in this Journal certify that:
- The work submitted for publication in The Ship Science and Technology journal, was written by the author, given that its content is the product of his/her direct intellectual contribution.
- All data and references to material already published are duly identified with their respective credits and are included in the bibliographic notes and quotations highlighted as such.
- All materials submitted for publication are completely free of copyrights; consequently, the author accepts responsibility for any lawsuit or claim related with Intellectual Property Rights thereof, Exonerating of responsibility to The Science and Technology for the Development of Naval, Maritime, and Riverine Industry Corporation, COTECMAR.
- In the event that the article is chosen for publication by The Ship Science and Technology journal, the author state that he/she totally transfers reproduction rights of such to The Science and Technology for the Development of Naval, Maritime, and Riverine Industry Corporation, COTECMAR.
- The authors retain the copyright and transfer to COTECMAR the right of publication and reproduction of the work which will be simultaneously subject to the Creative Commons Attribution License (CC - BY), which allows the license to copy, distribute, display and represent the work and to make derivative works as long as it recognizes and cites the work in the manner specified by the author or licensor.
- For more information about the Creative Commons Attribution License (CC -BY) and his use and scope, please visit the following web page https://creativecommons.org/licenses/by-sa/4.0/legalcode