Evaluación fotogramétrica de los estándares de tolerancia geométrica: un estudio de caso de modelo de Darpa

Autores/as

  • Fillipe R. Esteves Universidade de São Paulo
  • Helio C. S. Júnior Centro Tecnológico da Marinha em São Paulo
  • André M. Kogishi Instituto de Pesquisas Tecnológicas
  • Bernardo L. R. Andrade Universidade de São Paulo

DOI:

https://doi.org/10.25043/19098642.184

Palabras clave:

Fotogrametría, DARPA Suboff, Tolerancia geométrica

Resumen

Se utilizó un modelo a escala DARPA Suboff para el desarrollo de una metodología de análisis para las desviaciones geométricas del casco, con el objetivo de controlar la calidad del modelo del proceso de fabricación. Las coordenadas tridimensionales de la superficie se obtuvieron a través de un estudio fotogramétrico y se analizaron en base a herramientas estadísticas.

Los resultados se clasificaron de acuerdo con los estándares de tolerancia geométrica del ITTC y DIN ISO, lo que permitió investigar el cumplimiento del modelo con dichos criterios y estudiar las desviaciones geométricas locales.

Descargas

Los datos de descargas todavía no están disponibles.

Biografía del autor/a

Fillipe R. Esteves, Universidade de São Paulo

Departamento de Engenharia Naval e Oceânica, Universidade de São Paulo, Brazil.

Helio C. S. Júnior, Centro Tecnológico da Marinha em São Paulo

Laboratório de Hidrodinâmica, Centro Tecnológico da Marinha em São Paulo, Brazil.

André M. Kogishi, Instituto de Pesquisas Tecnológicas

Instituto de Pesquisas Tecnológicas. São Paulo, Brazil.

Bernardo L. R. Andrade, Universidade de São Paulo

Departamento de Engenharia Naval e Oceânica, Universidade de São Paulo, Brazil.

Referencias bibliográficas

ERNARDO LUIS RODRIGUES DE ANDRADE; BRUNO LOUREIRO DE ALMEIDA; FILLIPE ROCHA ESTEVES; PEDRO HENRIQUE BULLA et al. Scale model geometric verification using photogrammetry. In: 27o Congresso Internacional De Transporte Aquaviário, Construção Naval E Offshore, 2018, Rio de Janeiro. Anais eletrônicos... Campinas, GALOÁ, 2018. Available at: Access 29 jan, 2019. https://doi.org/10.17648/sobena-2018-87548

DIN ISO; DIN ISO 2768-1-m General tolerances - Part 1: Tolerances for linear and angular dimensions without individual tolerance indications. 1989.

GOM; Photogrammetry Tritop 6.2 Manual Basic. Germany, 2009.

GROVES, N. C.; HUANG, T. T.; CHANG, M. S.; Geometric Characteristics of DARPA Suboff Models. Bethesda: David Taylor Research Center, 1989.

ITTC; Ship Models Recommended Procedures. 2011

Descargas

Publicado

2019-07-31

Cómo citar

Esteves, F. R., Júnior, H. C. S., Kogishi, A. M., & Andrade, B. L. R. (2019). Evaluación fotogramétrica de los estándares de tolerancia geométrica: un estudio de caso de modelo de Darpa . Ciencia Y tecnología De Buques, 13(25), 9–18. https://doi.org/10.25043/19098642.184

Número

Vol. 13 Núm. 25

Sección

Artículos científicos y tecnológicos

Licencia

The authors who publish in this Journal certify that:

  • The work submitted for publication in The Ship Science and Technology journal, was written by the author, given that its content is the product of his/her direct intellectual contribution.
  • All data and references to material already published are duly identified with their respective credits and are included in the bibliographic notes and quotations highlighted as such.
  • All materials submitted for publication are completely free of copyrights; consequently, the author accepts responsibility for any lawsuit or claim related with Intellectual Property Rights thereof, Exonerating of responsibility to The Science and Technology for the Development of Naval, Maritime, and Riverine Industry Corporation, COTECMAR.
  • In the event that the article is chosen for publication by The Ship Science and Technology journal, the author state that he/she totally transfers reproduction rights of such to The Science and Technology for the Development of Naval, Maritime, and Riverine Industry Corporation, COTECMAR.
  • The authors retain the copyright and transfer to COTECMAR the right of publication and reproduction of the work which will be simultaneously subject to the Creative Commons Attribution License (CC - BY), which allows the license to copy, distribute, display and represent the work and to make derivative works as long as it recognizes and cites the work in the manner specified by the author or licensor.
  • For more information about the Creative Commons Attribution License (CC -BY) and his use and scope, please visit the following web page https://creativecommons.org/licenses/by-sa/4.0/legalcode
QR Code